Item Tag: United States

Topsolar 30W 12V/24V Solar Panel Kit Charge Controller Mount

Key Features. Perfect for off grid 12 volt batteries charging system and a variety of DC applications, designed for maintaining 12 volt batteries in car, RVs, cabins, boats, marine, battery operated gates, back-up power and remote power use.

Uni-Solar PVL-116 116W 24V Flexible Amorphous Solar Panel w/MC3 Cables UL LISTED

Uni-Solar PVL-116 *UL LISTED* 116 Watt 24 Volt Brand New Flexible Amorphous Solar Panel with MC3 Connectors. These panels are just over 16 feet long. Electrical Stats: Maximum Power (Pmax): 116 Watts Nominal Operating Voltage: 24 Volts Peak Power (Volts): 30 Volts Peak Power (Amps): 3.88 Amps Open Circuit Volts: 43.2 Volts Short Circuit Amps: 4.8 Amps Physical Stats: Panel Dimensions (Feet): 16.4 long x 1.29 wide Panel Dimensions (Inches): 197.3 long x 15.5 wide x 0.2 thick Panel Weight: 15.5 Pounds Electrical Connectors: MC3 Connectors – Push / Pull apart Features: Lightweight & Flexible Easy Peel & Stick Application Virtually Unbreakable (No Glass) Shadow & High Heat Tolerant Frame Material: Frameless Bonding adhesive factory-installed on the back of the laminate

Uni-Solar PVL-24 5V 24W Flexible 3-Foot Solar Panel w/ Solder Points – No Cables

Uni-Solar PVL-24 5V 24W Flexible 3-Foot Solar Panel w/ Solder Points – No Cables Uni-Solar PVL-24 5V 24W Flexible Amorphous 3-Foot Long Solar Panel Battery Charger. Combine 3 of these panels in series to increase voltage for charging 12 Volt Batteries. No Cables or Junction Box Included DIY. Category 3 (130 MPH) Hurricane uplift resistant when installed in accordance with manufacturer’s guidelines. Designed for 5V USB voltage charging (No USB port Included). Combine multiple panels to increase voltage as needed for various battery configurations. Small form factor for custom Vehicle solar charging. These 36 inch long 3 cell panels are the shortest PVL Series panels Unisolar Made allowing multiple panels to be connected to fit small roof surface applications such as Golf Carts, VW Vans and Experimental Electric Vehicles. Panels are roll-able to about 6 inches in diameter to take hiking and backpacking. Previous customers have reported installing these panels on their corrugated metal roofs by attaching 18″ x 2″ metal strips every few feet on the sticky backing, leaving the white covering for the sticky backing intact where the metal strips are not present (saving the sticky material for other projects in case the panel is moved later). They then drove self-tapping screws through the protruding ends of the metal strips onto their metal roof, sealed with a proper caulk. This allowed them to install the panel with its built-in sticky backing and yet keep the installation non-permanent. Electrical Stats: Maximum Power (Pmax): 24 Watts Nominal Operating Voltage: 5 Volts (approximately) Max Power Voltage (Vmpp): 4.6 Volts Max Power Current (Impp): 5.2 Amps Open Circuit Voltage (Voc): 6.1 Volts Physical Stats: Panel Dimensions (Feet): 3 long x 1.29 wide Panel Dimensions (Inches): 36 long x 15.5 wide x 0.2 thick Panel Weight: 2.75 Pounds Electrical Connectors: None: Solder Points on top of panel Features: Lightweight & Flexible Easy Peel & Stick Application Virtually Unbreakable (No Glass) Shadow & High Heat Tolerant Frame Material: Frameless Bonding adhesive factory-installed on the back of the laminate Uni-Solar panels are lightweight, flexible and directly adhere to many roofing surfaces avoiding penetrations. Each cell is connected to each other via bypass diodes. Therefore, if one cell is shaded or soiled, only the power output of this one shaded cell is lost – usually less than 4.5%.These panels are less than 1/5th the weight of crystalline solar panels and are designed for membrane and metal roofing system applications. Here is a video with many examples.  UNISOLAR PVL-24 Solar Power Amorphous Flexible PV Panels – YouTube Video will open in a new window [isdntekvideo]   Condition: Open Box This new open box panel has top-facing solder points for connections above the panel. When 3 of these panels are combined in series they will produce a good voltage for charging 12 Volt Batteries. We are not including any cable or junction boxes but the solder points are easy to access and will allow you to attach your own cable by soldering.Please review our photo set and contact us if you have any questions.CLICK BELOW FOR MORE SOLAR OPTIONSShippingBest OffersReturns

16 Units per Set Solar Panel Mounting Z Brackets, Solar Panel Mounting Brackets

16 Units per Set Solar Panel Mounting Z Brackets, Solar Panel Mounting Brackets Lightweight Aluminum Corrosion-Free for RVs, Trailers, Boats, Yachts, Wall and Other Off Gird Roof. • 【SUPERIOR QUALITY】 Anodized Aluminum Z brackets, Stainless Steel Hex Bolts and Screws, service life up to 25 years, perfectly supporting solar panels in off-grid installations.