Item Tag: Solar Charge Controller

Voltset 12V MPPT Solar Charge Controller for AGM, Gel, LiFePO4 Batteries

The Voltset 12V MPPT Solar Charge Controller is a versatile unit designed for AGM, Gel, and LiFePO4 batteries. With a sleek black color and a portable design, this controller is perfect for outdoor use. Its MPPT technology ensures efficient charging, maximizing the power output from your solar panels. The vertical axis orientation allows for easy installation and the unit quantity is in ounces, making it convenient to transport and use on the go. Ideal for those looking to harness alternative energy supplies for their home.

100A 80A 60A 40A MPPT Solar Charge Controller Lead Acid Lifepo4 Lithium Battery.

MPPT 100A 12V 24V 36V 48V PV 150V 12V system : Open circuit voltage≤96V（Voc) Max .PV input Power:1300W 24V system: Open circuit voltage≤112V（Voc) Max .PV input Power:2600W 36V system: Open circuit voltage≤144V（Voc) Max .PV input Power:3800W 48V system: Open circuit voltage≤144V（Voc) Max .PV input Power:5000W MPPT 60A 12V 24V 36V 48V PV 160V 12V system : Open circuit voltage≤96V（Voc) Max .PV input Power:720W 24V system: Open circuit voltage≤108V（Voc) Max .PV input Power:1440W 36V system: Open circuit voltage≤160V（Voc) Max .PV input Power:2160W 48V system: Open circuit voltage≤160V（Voc) Max .PV input Power:2800W Overview OOYCYOO 100Amps MPPT solar charge controller is based on an advanced maximum power point tracking(MPPT) technology developed, dedicated to the solar system, the charge controller conversion efficiency up to 99%. Features MPPT 100A solar charge controller 100% MPPT technology 0 Layer, easy installation, easy setup Built-in DSP controller with high performance Automatic switch for 12V/24V/36V/48V battery bank 3-stage charging optimizes battery performance Overcharge protection, Input PV polarity reverse protection, Output limited current protection, Over-temperature protection Troubleshooting promotion function. Suitable for battery types such as sealed lead acid, vented gel, and lithium battery, etc Easy to be mounted Datasheet Technical Specification for Selection Guide Models 100A 12V 24V 36V 48V Charging mode MPPT Maximum power point tracking automatically Charging 3-stage:constant current(MPPT), constant voltage(Absorption Voltage), floating charge System type DC12V/24V/36V/48V Recognition automatically System voltage automatic recognition 1 2V system (DC9V-DC15V) 24V system (DC18V-DC29V) 36V system (DC30V-DC39V) 48V system (DC40V〜DC60V) Soft start time 98.1 % (Voc is 1.5 or 2 times than battery, then it’s the best efficiency) PV utilization >99% Input specification VOC from PV( Make sure the Voc of PV meeting the requirement as right. Voc is 1.5 or 2 times than battery, then it’s the best efficiency.) 12V system (DC20V〜DC96V) 24V system (DC37V-DC196V) 36V system (DC50V〜DC144V) 48V system (DC72V〜DC144V) The maximum PV input voltage (Voc) DC190V(The controller can’t work at this voltage of long duration that will break controller. Please refer to the Input voltage from PV.) The maximum PV input power (The total power rated of PV can’t be over this watt that will break the controller.) 12V system (1300W) 24V system (2600W) 36V system (3800W) 48V system (5000W) Output specification Selectable battery type(default is Sealed) Vented/ Sealed / Gel / NiCd / Lithium battery(defined voltage for other battery by user) Absorption Charging Voltage Refer to Batteries charging reference Floating Charging Voltage Refer to Batteries charging reference Overcharging protection voltage 12V system (15V) 24V system (30V) 36V system (45V) 48V system (60V) Rated output current 100A Temperature Coefficient ±0.02%/ °C Automatic temperature compensation 14.2V-(Max temperature-25 °C)*0.3 Output voltage ripple-peak 100mv Output voltage accuracy 40 °C Fan-off temperature <35 °C Acoustic noise <40dB Cooling way Forced air cooling Components Imported materials, Accord to EU standards, Industrial grade range. Environmental requirements Meet 2002/95/EC; No cadmium, hydrides, and fluorides Security Level Accord to CE, PSE, FCC, EMC, EN60950 Electromagnetic Compatibility Accord to EN6W00, EN55022, EN55024 Enclosure IP21 Net weight(Kg) 3.8 Gross weight(Kg) 4.0 Datasheet Technical Specification for Selection Guide Models 60A 12V 24V 36V 48V Charging mode MPPT Maximum power point tracking automatically Charging 3-stage:constant current(MPPT), constant voltage(Absorption Voltage), floating charge System type DC12V/24V/36V/48V Recognition automatically System voltage automatic recognition 1 2V system (DC9V-DC15V) 24V system (DC18V-DC29V) 36V system (DC30V-DC39V) 48V system (DC40V〜DC60V) Soft start time 98.1 % (Voc is 1.5 or 2 times than battery, then it’s the best efficiency) PV utilization >99% Input specification VOC from PV( Make sure the Voc of PV meeting the requirement as right. Voc is 1.5 or 2 times than battery, then it’s the best efficiency.) 12V system (DC18V〜DC72V) 24V system (DC36V-DC108V) 36V system (DC50V〜DC144V) 48V system (DC72V〜DC160V) The maximum PV input voltage (Voc) DC190V(The controller can’t work at this voltage of long duration that will break controller. Please refer to the Input voltage from PV.) The maximum PV input power (The total power rated of PV can’t be over this watt that will break the controller.) 12V system (720W) 24V system (1440W) 36V system (2100W) 48V system (2800W) Output specification Selectable battery type(default is Sealed) Vented/ Sealed / Gel / NiCd / Lithium battery(defined voltage for other battery by user) Absorption Charging Voltage Refer to Batteries charging reference Floating Charging Voltage Refer to Batteries charging reference Overcharging protection voltage 12V system (15V) 24V system (30V) 36V system (45V) 48V system (60V) Rated output current 60A Temperature Coefficient ±0.02%/ °C Automatic temperature compensation 14.2V-(Max temperature-25 °C)*0.3 Output voltage ripple-peak 100mv Output voltage accuracy 40 °C Fan-off temperature <35 °C Acoustic noise <40dB Cooling way Forced air cooling Components Imported materials, Accord to EU standards, Industrial grade range. Environmental requirements Meet 2002/95/EC; No cadmium, hydrides, and fluorides Security Level Accord to CE, PSE, FCC, EMC, EN60950 Electromagnetic Compatibility Accord to EN6W00, EN55022, EN55024 Enclosure IP21 Net weight(Kg) 1.8 MPPT 40A 12V system : Open circuit voltage≤72V（Voc) Max .PV input Power:500W 24V system: Open circuit voltage≤96V（Voc) Max .PV input Power:1000W MPPT 60A 12V system : Open circuit voltage≤72V（Voc) Max .PV input Power:750W 24V system: Open circuit voltage≤96V（Voc) Max .PV input Power:1500W MPPT K80A 12V system : Open circuit voltage≤72V（Voc) Max .PV input Power:1000W 24V system: Open circuit voltage≤96V（Voc) Max .PV input Power:2000W MPPT K100A 12V system : Open circuit voltage≤72V（Voc) Max .PV input Power:1300W 24V system: Open circuit voltage≤96V（Voc) Max .PV input Power:2600W Package Includes 1 x MPPT Solar Charge Controller 1 x English User Manua

Solar Panel Regulator Charge Controller Auto Focus Tracking 30A 60A 12V/24V

Professional Tools & More Quality ProductGreat PricingSame Day*Fast Shipping Solar Panel Regulator Charge Controller Auto Focus Tracking 30A 60A 12V/24V Features Build-in industrial micro controller. Large LCD display, all adjustable controlling parameter of the system. Fully 3-stage PWM charge management. Build-in all necessary protections including short-circuit protection, open-circuit protection, reverse protection, over-load protection. Dual MOSFET Reverse current protection, low heat production   LCD display/key and Operations: MENU: Switch between different display, or to enter/exit setting by long press. UP: Press to increase value. DOWN: Press to decrease value.   System Connection: 1.Connect the battery to the charge regulator – plus and minus. 2.Connect the photovoltaic module to the regulator – plus and minus. 3.Connect the consumer to the charge regulator – plus and minus. *The reverse order applies when deinstalling! *An improper sequence order can damage the controller!   Attention: 1.press the [Down] button to ON/OFF load manually at main display. 2.the work mode is working as below: [24H] load output 24hours [1-23H] load on after sunset and closed after setting hours [0H] Dusk to dawn 3.Batteries:Only fit for OPEN, AGM, GEL 4.The charge regulator is only suitable for, regulating solar modules Never connect another charging source to the charge regulator. 5.Please make sure your battery has enough voltage for the controller to recognize the battery type before first installation.   Specifications Load: Light Control Model: 30A,60A System Voltage: 12V / 24V Max Solar input(Solar Panel):36V(24V battery) 18V(12V battery) Max input power: 390W(12V system); 780W(24V system) Equalization: 12.6V(sealed) 14.2V(Gel) 14.6V(flood) Float charge: 13.7V(default, adjustable)，12.0-15.0V Discharge stop voltage: 10.7V(default, adjustable)，9.0-11.5V Discharge reconnect voltage:12.5V(default, adjustable)，11.0-13.0V Rated current: 30A, 60A Self-consume:<10mA Batteries: Only fit for OPEN, AGM, GEL Operating Temperature:-35℃~60℃ USB output: 5V/2A Max Dimension:13.4cm x 7 x 3.3cm (30A), 18.3cm x 9cm x 4.5cm (60A)   Package Included One (1) Solar Charge Controller User Manual  New eBay Managed Payments.  You may use any major credit cards, PayPal,  or Apple Pay to conveniently and securely pay for your orders.  Payment Free Same Day Shipping.You orders placed before noon (EST) will be processed and dispatched in the same day. We ship on Saturdays too.​​​​​​​Shipping eBay Managed, Hassle Free.If you are not 100% satisfied within 30 days of your purchase, you can return the product and get a full refund or replacement.​​​​​​​Returns Quality ProductGreat PricingFast ShippingSee our other itemsFeatures —Build-in industrial micro controller. —Large LCD display, all adjustable controlling parameter of the system. —Fully 3-stage PWM charge management. —Build-in all necessary protections including short-circuit protection, open-circuit protection, reverse protection, over-load protection. —Dual MOSFET Reverse current protection, low heat production LCD display/key and Operations: —MENU: Switch between different display, or to enter/exit setting by long press. —UP: Press to increase value. —DOWN: Press to decrease value. System Connection: 1.Connect the battery to the charge regulator – plus and minus. 2.Connect the photovoltaic module to the regulator – plus and minus. 3.Connect the consumer to the charge regulator – plus and minus. *The reverse order applies when deinstalling! *An improper sequence order can damage the controller! Attention: 1.press the [Down] button to ON/OFF load manually at main display. 2.the work mode is working as below: —[24H] load output 24hours —[1-23H] load on after sunset and closed after setting hours —[0H] Dusk to dawn 3.Batteries:Only fit for OPEN, AGM, GEL 4.The charge regulator is only suitable for, regulating solar modules Never connect another charging source to the charge regulator. 5.Please make sure your battery has enough voltage for the controller to recognize the battery type before first installation. Specifications —Load: Light Control —Model: 30A,60A —System Voltage: 12V / 24V —Max Solar input(Solar Panel):36V(24V battery) 18V(12V battery) —Max input power: 390W(12V system); 780W(24V system) —Equalization: 12.6V(sealed) 14.2V(Gel) 14.6V(flood) —Float charge: 13.7V(default, adjustable)，12.0-15.0V —Discharge stop voltage: 10.7V(default, adjustable)，9.0-11.5V —Discharge reconnect voltage:12.5V(default, adjustable)，11.0-13.0V —Rated current: 30A, 60A —Self-consume:<10mA —Batteries: Only fit for OPEN, AGM, GEL —Operating Temperature:-35℃~60℃ —USB output: 5V/2A Max —Dimension:13.4cm x 7 x 3.3cm (30A), 18.3cm x 9cm x 4.5cm (60A) Package Included —One (1) Solar Charge Controller —User Manual Solar Panel Regulator Charge Controller Auto Focus Tracking 30A 60A 12V/24V Features Build-in industrial micro controller. Large LCD display, all adjustable controlling parameter of the system. Fully 3-stage PWM charge management. Build-in all necessary protections including short-circuit protection, open-circuit protection, reverse protection, over-load protection. Dual MOSFET Reverse current protection, low heat production   LCD display/key and Operations: MENU: Switch between different display, or to enter/exit setting by long press. UP: Press to increase value. DOWN: Press to decrease value.   System Connection: 1.Connect the battery to the charge regulator – plus and minus. 2.Connect the photovoltaic module to the regulator – plus and minus. 3.Connect the consumer to the charge regulator – plus and minus. *The reverse order applies when deinstalling! *An improper sequence order can damage the controller!   Attention: 1.press the [Down] button to ON/OFF load manually at main display. 2.the work mode is working as below: [24H] load output 24hours [1-23H] load on after sunset and closed after setting hours [0H] Dusk to dawn 3.Batteries:Only fit for OPEN, AGM, GEL 4.The charge regulator is only suitable for, regulating solar modules Never connect another charging source to the charge regulator. 5.Please make sure your battery has enough voltage for the controller to recognize the battery type before first installation.   Specifications Load: Light Control Model: 30A,60A System Voltage: 12V / 24V Max Solar input(Solar Panel):36V(24V battery) 18V(12V battery) Max input power: 390W(12V system); 780W(24V system) Equalization: 12.6V(sealed) 14.2V(Gel) 14.6V(flood) Float charge: 13.7V(default, adjustable)，12.0-15.0V Discharge stop voltage: 10.7V(default, adjustable)，9.0-11.5V Discharge reconnect voltage:12.5V(default, adjustable)，11.0-13.0V Rated current: 30A, 60A Self-consume:<10mA Batteries: Only fit for OPEN, AGM, GEL Operating Temperature:-35℃~60℃ USB output: 5V/2A Max Dimension:13.4cm x 7 x 3.3cm (30A), 18.3cm x 9cm x 4.5cm (60A)   Package Included One (1) Solar Charge Controller User Manual  Quality ProductFast ShippingSee our other items Features Build-in industrial micro controller. Large LCD display, all adjustable controlling parameter of the system. Fully 3-stage PWM charge management. Build-in all necessary protections including short-circuit protection, open-circuit protection, reverse protection, over-load protection. Dual MOSFET Reverse current protection, low heat production   LCD display/key and Operations: MENU: Switch between different display, or to enter/exit setting by long press. UP: Press to increase value. DOWN: Press to decrease value.   System Connection: 1.Connect the battery to the charge regulator – plus and minus. 2.Connect the photovoltaic module to the regulator – plus and minus. 3.Connect the consumer to the charge regulator – plus and minus. *The reverse order applies when deinstalling! *An improper sequence order can damage the controller!   Attention: 1.press the [Down] button to ON/OFF load manually at main display. 2.the work mode is working as below: [24H] load output 24hours [1-23H] load on after sunset and closed after setting hours [0H] Dusk to dawn 3.Batteries:Only fit for OPEN, AGM, GEL 4.The charge regulator is only suitable for, regulating solar modules Never connect another charging source to the charge regulator. 5.Please make sure your battery has enough voltage for the controller to recognize the battery type before first installation.   Specifications Load: Light Control Model: 30A,60A System Voltage: 12V / 24V Max Solar input(Solar Panel):36V(24V battery) 18V(12V battery) Max input power: 390W(12V system); 780W(24V system) Equalization: 12.6V(sealed) 14.2V(Gel) 14.6V(flood) Float charge: 13.7V(default, adjustable)，12.0-15.0V Discharge stop voltage: 10.7V(default, adjustable)，9.0-11.5V Discharge reconnect voltage:12.5V(default, adjustable)，11.0-13.0V Rated current: 30A, 60A Self-consume:<10mA Batteries: Only fit for OPEN, AGM, GEL Operating Temperature:-35℃~60℃ USB output: 5V/2A Max Dimension:13.4cm x 7 x 3.3cm (30A), 18.3cm x 9cm x 4.5cm (60A)   Package Included One (1) Solar Charge Controller User Manual 

Eco-Worthy 12V/24V Solar Charge Controller #EW1907-30A.Brand New in Box.FREESHIP

The Eco-Worthy 12V/24V Solar Charge Controller #EW1907-30A is a high-quality and versatile product designed for off-grid solar power systems. With a flexible design and a black color, this solar charge controller is suitable for various applications such as recreational vehicles, sheds, homes, and gardens. It features a USB port for charging small devices and uses PWM charging mode for efficient power management. The Eco-Worthy brand ensures reliability and durability, making this solar charge controller a great addition to your alternative energy supplies.

10A 12V Solar Charge Controller Waterproof Solar Intelligent Battery Regulator

10A 12V Solar Charge Controller The 10A solar charge controller is suitable for solar panels above 20W, applicable to 12V batteries, and more efficient. Solar panels can convert light energy into electricity and store it in the battery, which will be protected by the solar controller. Note: Please look for the brand VOLTSET. We are official and genuine products, and our customers enjoy 12-month free warranty service and lifetime technical support. Thank you for supporting and choosing VOLTSET. Applicable to solar panels above 20W 🌞 The 10A solar charge controller is suitable for solar panels above 20W, applicable to 12V batteries, and more efficient. Solar panels can convert light energy into electricity and store it in the battery, which will be protected by the solar controller. Waterproof Charge Controller 🌞 IP65 waterproof, suitable for outdoor use. 10A charge controller solar panel is only suitable for 12V solar panels and 12V batteries. The maximum power of the solar panel is 130W, and the maximum current is 10a. Solar controller protects the solar battery from excessive electric energy damage. LED Indicators Monitoring 🌞 The 12v solar controller integrates 3 clear LED indicators to help you visualize the working status and battery condition well at all times. Red light and Blue light (Charging) – Blue light (In Sunlight) – Green Light (Full Charge) – No Light (Short Circuit). When solar power fails, you can check the connection in time. The solar charge maintainer is only powered by solar panels and does not consume battery power. Safety Use 🌞 12v solar charge controller has multiple protection functions: battery undervoltage, overvoltage, output overload, short circuit, low voltage, damage caused by overcharging, and solar panel anti-reverse connection protection. This 10-amp solar charge controller will extend the life of your battery. How to Connect 🌞 Please recognize the correctness of the positive and negative polarity of the solar panel controller before connecting. Our controller red is the positive pole, and the black is the negative pole. Please connect the positive pole to the positive pole and the negative pole to the negative pole. At the same time, we have attached a polarity converter. What You Get ✅ 1*solar charge controller, 1*manual and 2*polarity converter. Voltset provides 12 months warranty and our 7*24 hours technical service support. If you have any questions, please contact us directly, we will solve the problem for you in time.