12V 24V 10A/20A/30A Solar Panel Regulator Charge Controller Battery Dual USB PWM
200W Solar Panel Kit with 100A 12V Battery Charger Controller Caravan Boat Car
200W Solar Panel Kit with 100A 12V Battery Charger Controller Caravan Boat Car Feature: It has a single crystal r chip, lightweight and portableBuilt-in diodes in the alligator clip to help prevent reverse charging.IP65 waterproof, can be placed outdoors without worrying about being damaged by rainHigh-quality Material: All positive and negative electrodes are made of high quality silver paste with high welding strength and low series resistance.High Conversion Rate & Good Output Efficiency: The solar panel with high conversion rate of about 24% charges fast in the direct strong sunlight.Provides 2 alligator clips and charging cable for all kinds of equipment, emergency lights, advertising lights, traffic lights, electric fans, solar water pumps, motorcycles, boats or any 12V lead acid battery.Applicable to: mobile phones, mobile power packs, laptops, tablets, GPS, cameras, USB fans, USB lights, etc.Continuously storing electricity during the day, you only need to install this solar panel on the car.Installation: Face the solar panel towards the sun and fix the suction cup on the windshield, workbench in frontSpecification:Type: Solar Panel With 100A ControllerConversion Rate: 23-24% Color: BlackNo Load Voltage: 20.8V DCOutput Current: 1000mA (Max) Panel: Monocrystalline SiliconShort Circuit Current: 1500mA Load Voltage: 12VShort circuit current: 2AOutput Voltage: 5 VCharging time: 2 HBattery Board Specification: High Efficiency Single Crystal BoardOverall Dimension:28cm*28.5cm*0.2cm Application Range:Mobile PhoneWaterproof: IP65 Working temperature: – 35 ℃ + 60 ℃Application: Automobile Battery, Automobile, RV, Ship, Aircraft, Satellite, Space Station, Outdoor Breeding, Planting, Tourism, Solar Street Lamp Package Included:1× Solar Panel2× Mountaineering buckle1× Car Charger1× Battery Clip 1× 10-in-1 Charging Cable1× ControllerShippingPaymentReturn & Refund policyFeedbackCustomer Support – ContactShippingFREE SAME BUSINESS DAY MONDAY- FRIDAY SHIPPING FROM USA. All orders and payments received before 4PM EST (1PM PST) will be shipped the same business day. No shipping on Weekends or US Public Holidays. No responsibility for any custom duty Shipping information will be updated when available.Payment1. All payments must be prepaid before shipping.2. We only accept payment via PayPal. Please kindly check if you can do the payment via PayPal before placing an order. Return & Refund policy(1) We stand behind our items and offer 60 days warranty. All items are in brand new condition unless specified otherwise elsewhere in the description.(2) All returns – defective or otherwise – have to be preauthorized. Please contact us to get an authorization and returning address before sending the item back. If an item is returned because of an undeliverable shipping address, buyer agrees to pay the cost for re-shipment.(3) Please note that If the return/replacement is not a result of our mistake (not defective or wrong item), the buyer is responsible for return shipping, as well as a 20 percent restocking fee.(4) Replacement or refund will be made upon receipt of the returned item. If you do not want to wait for the replacement, you can just reorder one and then send the first one back for a refund.FeedbackWe strive to provide the best service and reliable products for every customer, however, accident may happen sometimes, please contact us to resolve any issue before leaving a negative feedback.Customer Support – ContactPlease do not hesitate to CONTACT US. You can message 24/7 on eBay for all questions and inquiries. We will get back to you within 1-2 business days at the latest.
200W Solar Panel Kit 100A 12V battery Charger Controller Caravan Boat RV Outdoor
200W Solar Panel Kit 100A 12V battery Charger Controller Caravan Boat RV Outdoor200W Solar Panel + 100A Controller: Features: Scratch resistant, non foaming, easy to clean. It is semi flexible and can be bent properly to use a wider range of applications. Light weight, easy to carry. High conversion rate and high yield. High stability and good durability. It has a single crystal r chip, which can be used in automobiles, families, ships, motorcycles, etc. High conversion efficiency, good output efficiency, low light efficiency, light weight, easy to carry and strong applicability. With advanced polyethylene coating technology, the battery surface is coated with dark blue reflective film, which is uniform and beautiful in color. Strong resistance, can resist different environments, good waterproof performance. All positive and negative electrodes are made of high quality silver paste with high welding strength and low series resistance.How to use it: 1. First, face the sun with a solar panel, and a red light on the back indicates that the current output is normal, 2. Fix the suction cup on the windshield or other positions where sunlight is easy to shine, and the absorption effect will be better; 3. You can also put it on the workbench in front of the dashboard.Specifications: Condition: Brand new Color: Black No Load Voltage: 20.8V DC Short CircuitCurrent: 1500mA Output Current: 1000 mA (Max) Load Voltage: 12V Short circuit current: 2A Output Voltage: 18 V Charging time: 2 H Battery Board Specification: High Efficiency Single Crystal Board Overall Dimension: 330*360*2.5mm Application Range:Mobile Phone Conversion Rate: 23-24% Working temperature: – 40 ℃ + 85 ℃ Type: With 10A-50A Controller Application: Automobile Battery, Automobile, RV, Ship, Aircraft, Satellite, Space Station, Outdoor Breeding, Planting, Tourism, Solar Street LampPackage Included: 1x Solar Panel (with 100A MPPT controller) 4x Suction Cup 1x Clip 1x Car Charger 1x DC Male Cable30A Solar Charger Controller: Characteristics:1. Build-in industrial microcontroller.2. One-key configuration, digital display, automatic memory function.3. Fully pwm-load management load.4. Build-in short circuit protection, open circuit protection, reverse protection, over load protection5. Dual mosfet Reverse current protection, low heat productions. Security instructions:1. Make sure that the battery has enough voltage for the controller to recognize the type of battery before first installation. 2. The battery cable should be as short as possible to minimize losses. 3. The regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL It is not suitable for nickel metal hydride batteries, lithium ions or batteries. 4. The charge controller is only suitable for the regulation of solar modules. Never connect another load source to the charge controller. Description: Type:Solar Power Meters Material:ABS+component Power:12V/24V Display Type:LCD Display Interface:Dual USB Connection of the system:1. Connect the battery to the charge controller plus and minus. 1 will be displayed, in case of detecting 12 V battery, 2 in case of detecting 24 V battery.2. Connect the photovoltaic module to the plus and minus regulator.3. Connect to the consumer for the charge controller plus and minus.the reverse order applies when uninstalling!An incorrect sequence order can damage the controller! Package List:1 x Solar Panel Battery Charge ControllerPAYMENTSHIPPINGReturn and Refund PolicyFEEDBACKHelp – Customer Support – ContacPAYMENT We accept payment via PayPal. Use PayPal at checkout to pay with credit or debit. Immediate payment is required. Shipping will be arranged within 1 business day once payment is cleared.SHIPPING FREE SAME BUSINESS DAY MONDAY- FRIDAY SHIPPING FROM USA.All orders and payments received before 4PM EST (1PM PST) will be shipped the same business day.All other orders within 1 business day.No shipping on Weekends or US Public Holidays. No responsibility for any custom duty Shipping information will be updated when available. Return and Refund Policy1. We stand behind our items and offer 60 days warranty. All items are in new and working condition unless specified otherwise elsewhere in the description.2. All Returns – defective or otherwise – MUST BE PREAUTHORIZED to guarantee refund or exchange. Please contact us to get an authorization and return address. 3. Buyer agrees to pay for the cost of re-shipment for undeliverable or wrong addresses. 4. Buyer is responsible for Return Postage as well as a 20% restocking fee if return/replacement is not a result of our mistake such as wrong item.5. Replacement or Refund will be made upon receipt of the returned item. Please include tracking number so we can process ASAP. If you do not wish to wait for a replacement, please repurchase the item. 6.ALL REFUNDS will be processed via PayPal. Please double check via PayPal history and transaction for confirmation. PayPal will send it back to whatever you used to pay within 3-5 days. FEEDBACK We strive to provide the best products and services. Your positive feedback 5 stars DSR help us do better. If anything about your transaction did not meet expectations, please CONTACT US and give us the opportunity to make things right. We are always here to help. Help – Customer Support – Contac Please do not hesitate to CONTACT US. You can message 24/7 on eBay for all questions and inquiries. We will get back to you within 1-2 business days at the latest.
4 MageClamp Standing Seam Metal Roof Clamp Bracket Solar Panel Install Racking
MageClamp is standing seam mounting clamp that can be attached to standing seam metal roof for solar installation and other applications. It fits most common stand seam metal roofs and optional L bracket can be attached to most solar mounting rails for solar installation.It can also be used for snow guard and appliances installation on standing seam metal roof.MageClamp block is made of aluminum alloy. Flange bolt and set screws are made of 304 stainless steel. Each order includes four (4) sets of MageClamp Standing Seam Metal Roof Clamps. Each set includes one MageClamp block, one 5/16 – 3/4″ flange bolt and two set screws.MageClamp with L Bracket is also available in other listings.Visit our eBay store for more selections.
4 End Clamp Standing Seam Metal Roof Solar Panel Module Mounting Racking Kits
Up for sale are 4 sets of Universal End Clamp Standing Seam Metal Roof Mounting Clamp Kits for solar installation on standing seam metal roof. This universal end clamp mounting kit can be used to install a solar panel directly on a standing seam metal roof without using any rails. The end clamp fits any solar panels with frame thickness of 33 mm – 41 mm. You also need mid clamp mounting kits for installing solar panels. Mid clamp mounting kits are available in another listing. If your solar panel frames are 42-51 mm thick or less than 33 mm thick, we also have tall universal end clamps and low universal end clamps for such frames. Please purchase this item and request tall or low universal end clamps. MageClamp block is made of aluminum alloy. Universal end clamp is made of stainless steel top and aluminum alloy bottom. Bolt, washer and set screws are made of 304 stainless steel. Universal End Clamp is UL 2703 certified. Each order comes with four (4) sets of Universal End Clamp Standing Seam Metal Roof Mounting Kits. Each set comes with one MageClamp block with two set screws and one universal End Clamp with bolt and washer. The products carry 25-year manufacturer warranty.
Magerack 6″ Standoff with L Bracket Solar Panel Module PV Mounting Racking 10 pc
Up for sale are 10 sets of Magerack 6″ Standoff with L Bracket for Solar Panel Module PV Mounting Racking that can be used for solar installation with most common rails. Standoff and L Bracket are made of aluminum alloy 6061-T6. Please note that the L bracket slot, through which a fastener is attached to rail is for up to 3/8″ bolt. The post is 6″ tall from bottom. The height from top of the L bracket to the bottom of the post is 9.55″. The height of the slot on L bracket is 7-1/2″ to 9″ tall from bottom. The products carry 25-year manufacturer warranty. The quality of this item is guaranteed. You may return it within 30 days if you are not satisfied.
10 MLPE Optimizer Microinverter Mounting Bracket Clamp Solar Rack Installation
Up for sale are 10 sets of Solar Accessory Mounting Brackets for Solar Optimizer Microinverter Installation from Magerack for Solar Panel Module Installation. Magerack Accessory Bracket, is module-level accessory mounting bracket that is attached to module frame with a flange bolt, through which microinverter, optimizer, etc. can be attached to the back of the module frame. Built-in Bonding Optimizer or microinverter is bonded to solar module through the integrated bonding pins on the bracket.Reduced Installation Time Optimizer or microinverter is mounted to solar module on ground, provide better PV cable positioning and management, and reduce installation time.Easy to Install Slide the bracket to the back frame of a solar module, slide optimizer or microinverter under flange bolt and tighten the bolt. No drilling or additional bolt or nut required. Each order comes with ten (10) sets of Accessory Brackets. Each set of Accessory Bracket comes with two-piece brackets and one 5/16 – 3/4″ stainless steel flange bolt. Optimizer, microinverter and solar panels are not included. The products carry 25-year manufacturer warranty. The quality of this item is guaranteed. You may return it within 30 days if you are not satisfied.
10 Black Tall L Bracket Foot Feet for Solar Panel Mounting Rack Installation
Magerack black tall L bracket foot can be used for solar installation on sloped residential composition shingle roof with most common rails or other applications.L bracket is 4-1/2″ tall, 1-1/2″ wide and 3″ long (deep), and made of black anodized aluminum alloyThe vertical portion has serration on both sidesThe top slot through which a fastener is attached to rail is for up to 3/8″ bolt. The bottom slot is for 5/16″ lag screwCompatible with most common solar mounting rails Quantity: Pack of 10Visit our eBay store for more selections.
10 Magerack L-Foot Feet Bracket & Flashing Solar Panel Mount Rack Installation
Magerack L-foot with Flashing can be used for solar installation on sloped residential composition shingle roof compatible with all side-mounting railsPatented flashing design, absolutely waterproofingExtremely easy to install at lowest costCompatible with most common rails from rail manufacturersThe vertical portion has serration on both sides571 lbs uplift and 536 lbs downforceL-foot is made of aluminum alloy 6061-T6 and flashing is made of aluminum sheet 3003 H14 for outdoor use.L bracket is 4-1/2″ tall, 1-1/2″ wide and 3″ long (deep)The top slot through which a fastener is attached to rail is for up to 3/8″ bolt. The bottom slot is for 5/16″ lag screwEach order includes 10 sets of L-foot with flashing. Each set includes one L-foot with bolt and lock washer and one flashing
10 Top-Mount Silver Magerack Z Brackets Foot Feet & Flashing Solar Mounting Rack
Magerack Top-Mount Silver Z Brackets with Silver Flashing can be used for solar installation and other applications on sloped residential composition shingle roof.Patented flashing design, absolutely waterproofingExtremely easy to install at lowest cost571 lbs uplift and 536 lbs downforceSilver L-foot Z bracket is made of aluminum alloy 6061-T6 and flashing is made of aluminum sheet 3003 H14 for outdoor use.Z bracket is 2″ tall, 1-1/2″ wide and 4.8″ long (deep)The top flat platform includes one 5/16 x 3/4″ or 1″ flange bolt. The bottom slot is for 5/16″ lag screw.Each order includes 10 sets of silver Z bracket with silver flashing. Each set includes one silver Z Bracket with flange bolts and one silver flashing. Flashings is 0.8 mm thick.