Item Tag: Planet 4 Solar

Solar Rail kit for 4 panels w/ clamps, L brackets w/7.3ft rails(not 3.6ft rails)

KIT TO MOUNT 4 PANELS IN A ROW. (Longer rails have less splice points as panels cannot have clamps in the 4 inch splice point area)This kit will mount 4 solar panels (42 inches wide) ) or 5 smaller Solar Panels (about 26 inches wide). The Solar Panels can have a thickness of 1 3/8 inch to 1 15/16 inch. Kit Contains: 4- 7.3 feet Rails (88 Inches 2250mm length) 4- Rail Splicers for 2 splicing points 4- End Clamps 8- Mid Clamps (2 extra mid-clamps to mount an extra smaller solar panel)8- L brackets, Lag Bolts, and Rubber Washer4- 25mm Bolt with Flange Nut4- Grounding Lugs8- Stainless Steel Wire Clips for cable size 10 or 12 They are all clear mill finish aluminum and the bolts are Stainless Steel. I can substitute frameless clamps for the framed clamps in this kit. Specifications: Product Name: Rail Kit Brand Name: Planet 4 Solar (UISolar Compatible) Material: Aluminum 6005-T5 Color: Silver Surface- Anodized Spec.: 2250 mm Length or 88 Inches Wind Speed : 60m/s Snow Load: 1.4KN/m2 Standard: AS/NZS 1170; TUV

Solar Mid Clamp 1″ Pack of 20 – No hardware

Solar Mid-Clamps – Pack of 20 These mid clamps are for mounting framed solar panels. They are clear mill finished. – The mid clamps are about 1 1/2 inches in length and the top width is about 2 inches – The mid-clamps are about 1 1/8 inches across the bottom (the section that goes between panels). – The bolt hole is 5/16 or 8 mm – No hardware included

Solar Panel Mounting Brackets-Adj End Clamp fit 35mm to 50mm -Pack of 20

Pack of 20 Adjustable End Clamps These clamps are for mounting framed solar panels. They are clear mill finish. These are adjustable end clamps so the solar panel frame size can be from 1 3/8 inch (35mm) to 1 15/16 inch (50mm). (I have purchased solar panels and the frame size was different than stated. My non-adjustable end clamps would not work.) The clamps are approximately 1 1/2 inches (35mm) wide. These clamps do include hardware to mount to the Plant 4 Solar (UISolar) rails I sell.

Rail Splice for Planet 4 Solar/UISolar (8 splice points)

NOTE: 2 Splice brackets are required for each splice point. This product will create 8 splice points for a total of 16 splices. This is a splice bracket to join two Planet 4 Solar (UISolar) rails together. The splicers are approximately 7 1/2 inches (191 mm) long. They are clear mill finish.