Item Tag: Photonic Universe

20A 12V/24V solar charge controller with LCD display (motorhome, boat, lighting)

Product overview: The UK solar power specialist Photonic Universe Ltd is proud to offer this brand new 20A 12V/24V solar charge controller / regulator with an LCD display for charging 12V or 24V batteries by solar panels with power up to 320W (with a 12V battery) / 640W (with a 24V battery). This high quality product is designed and made in Italy. Our promise: No-quibble 30 days return period UK repair or replacement warranty Free lifetime technical product support Deep industry expertise and knowledge This 20A 12V/24V solar charge controller uses PWM (Pulse Width Modulation) technology to improve charge acceptance and extend the life of your battery. PWM technology can also recover some lost battery capacity. Key features: Complete electronic protection of your battery and system, e.g. prevention of: current back-flow, overcharge / discharge, overvoltage, overload, short circuit, and reverse polarity LCD display showing advanced system information, including: power, voltage and current for the solar panels and battery, energy counter, temperature, load work Pre-set programmes for several battery types (sealed agm/gel, flooded lead acid) and fully adjustable low voltage battery protection 100% designed and made in Italy to the highest quality standards, with a 5 year manufacturer warranty This unit is compatible with sealed, gel and flooded lead acid batteries. It has pre-set charging programmes for different battery types, and battery low voltage protection can be also configured according to your requirements. Load working modes can be programmed for many different applications; for example to set on/off timers for lighting/ fans/pumps. The controller is compatible with solar panels with a combined power of up to 320W (12V battery) / 640W (24V battery) and voltage of up to 55V, although this controller works most efficiently with solar panels with an operating voltage of 17V-20V (with a 12V battery) / 34V-40V (with a 24V battery). Specifications: Fully automated operation and auto 12V/24V selection Rated charging and load current: 20A Enhanced monitoring and charging / load work control Maximum solar panel input voltage 55V 3 pairs of terminals (input, battery, load) for wire up to 10mm2 Temperature sensor: built in Full set of electronic protection functions Self-consumption: 8mA Working temperature: -10C to +60C Size: 15 x 12 x 5 cm Weight: 500 g Multiple mounting holes for ease of installation This controller comes with a detailed user manual. If you have any questions about this product or you need our free advice please contact us via eBay messaging (tick the box «This is not about an item» if you don’t know this item number). Payment:We accept Pay Pal, cheques, credit and debit cards, and bank transfer payments. If you choose a cheque payment, please note it might take up to 2-3 weeks to get processed and cleared. Other payment methods are normally much faster, and they should be used for urgent orders. Buy it now listings will require an immediate payment via eBay. Delivery:Please note that import duties, taxes, and charges are not included in the item price or shipping cost. If the courier requires payment of these local charges to complete the delivery, they will be your responsibility as a buyer.Upon receipt of the item, please examine it carefully. In the unlikely event of any damage in transit, please report it to us immediately by email or phone, but in any case no later than 7 days after receipt of the item. To enable us to deal with the courier efficiently, we may ask for some additional details, e.g. photographs of the damage and packaging. Returns:If you change your mind within the first 30 days of receipt of the item, we will be happy to accept it back and refund your payment. You will need to notify us via email / phone within 30 days of receipt that you intend to return the item, request the return address and send the item back within a further 14 days at your cost. To be eligible for a full refund, the item must be new, unused, undamaged and correctly packaged. Please ensure that we receive the item in its brand new, original condition, i.e. take reasonable care to wrap and protect it on the way back to us. Warranty: This product is covered by a 5 year manufacturer warranty. About us Photonic Universe Ltd is a company based in London, United Kingdom. We design and supply solar and wind renewable energy products and complete off-grid power systems for various applications, to both trade and retail customers. Tens of thousands of clients all over the world rely on our products to generate clean energy for their households, vehicles, boats and remote places with no access to mains electricity. We strongly believe that solar and wind energy can provide significant benefits and we are doing our best to allow you to buy these quality solar products at fair prices. We’ve had a lot of positive feedback from our customers who have been impressed by the high quality of our products and excellent service. We are VAT registered in the UK and can provide VAT receipts upon request. Photonic Universe is a registered trademark in the UK.

Victron BlueSolar MPPT 100/50 50A Solar Charge Controller solar panels max 100V

Product overview: The UK solar power specialist Photonic Universe Ltd is proud to offer this brand new, intelligent Victron BlueSolar 50A MPPT solar charge controller / regulator for solar panels up to 700W (12V battery system) / 1400W (24V battery system) and up to 100V with advanced connectivity options. Our promise: No-quibble 30 days return period UK repair or replacement warranty Free lifetime technical product support Deep industry expertise and knowledge Photonic Universe is an official distributor of products from Victron Energy – the globally renowned manufacturer of high quality hybrid power electronics. Victron Energy solar charge controllers have a longstanding reputation for their outstanding reliability, innovative design and superior build quality. This Victron 100V 50A MPPT controller comes from the intelligent BlueSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. BlueSolar MPPT controllers uniquely boast an intelligent battery life function, along with advanced communication options for remote system monitoring. Ultrafast MPPT Technology: This 50A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature. This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array. Inbuilt safety protection: Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as PV short circuit, PV reverse polarity, PV reverse current, battery reverse polarity and battery overheating – monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators. Advanced programming and monitoring: The user can connect an optional MPPT Control Panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel and battery as well as 30 day performance data. The user can also set the duration and voltage of each charging stage. Alternatively, by connecting the controller to a Victron VE Direct Bluetooth Dongle, or the VE Direct USB Cable (both sold separately), the user can gain access to the VictronConnect App, which unlocks numerous possibilities for advanced programming and remote monitoring of your BlueSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including: Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge. Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters. User-defined battery charging algorithm: Option to disable preset values in favour of personalised charging parameters, including user-defined absorption voltage, absorption time, float voltage, equalisation voltage and temperature compensation settings. The VictronConnect app is compatible with most mobile devices and computers, including Android and iOS smartphones, tablets, iPads, MacBooks, Windows PCs/laptops. Other features: The Victron BlueSolar MPPT 100-50 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating. This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries. Specifications: The most advanced MPPT technology to ensure high efficiency (> 95%) of your solar systemFully automated operation and auto 12/24V selection2 pairs of terminals (solar panel, battery) for wires up to 13mm2Max solar panel voltage: 100VMax solar panel power: 700W (12V) / 1400W (24V)Temperature sensor for automatic compensation (-16mV / °C resp. -32mV / °C)Comprehensive electronic protection featuresCommunication port: RS232 / TTL for VE Direct accessoriesSelf-consumption: 30mA (12V) / 20mA (24V)Working temperature: -30°C to +60°CIEC/EN certifiedEnclosure: IP43 (electronic components) / IP22 (connection area)Pollution Degree rating: PD3Dimensions: 130 x 186 x 70 mmMounting dimensions: 176 x 71.5 mmWeight: 1.3kg4 x mounting holes (8mm diameter) for ease of installation This item comes with a detailed user manual. If you have any questions about this product or you need our free advice please contact us via eBay messaging (tick the box «This is not about an item» if you don’t know this item number). Payment:We accept Pay Pal, cheques, credit and debit cards, and bank transfer payments. If you choose a cheque payment, please note it might take up to 2-3 weeks to get processed and cleared. Other payment methods are normally much faster, and they should be used for urgent orders. Buy it now listings will require an immediate payment via eBay. Delivery:Please note that import duties, taxes, and charges are not included in the item price or shipping cost. If the courier requires payment of these local charges to complete the delivery, they will be your responsibility as a buyer.Upon receipt of the item, please examine it carefully. In the unlikely event of any damage in transit, please report it to us immediately by email or phone, but in any case no later than 7 days after receipt of the item. To enable us to deal with the courier efficiently, we may ask for some additional details, e.g. photographs of the damage and packaging. Returns:If you change your mind within the first 30 days of receipt of the item, we will be happy to accept it back and refund your payment. You will need to notify us via email / phone within 30 days of receipt that you intend to return the item, request the return address and send the item back within a further 14 days at your cost. To be eligible for a full refund, the item must be new, unused, undamaged and correctly packaged. Please ensure that we receive the item in its brand new, original condition, i.e. take reasonable care to wrap and protect it on the way back to us. Warranty: This product is covered by a 5 year manufacturer warranty. About us Photonic Universe Ltd is a company based in London, United Kingdom. We design and supply solar and wind renewable energy products and complete off-grid power systems for various applications, to both trade and retail customers. Tens of thousands of clients all over the world rely on our products to generate clean energy for their households, vehicles, boats and remote places with no access to mains electricity. We strongly believe that solar and wind energy can provide significant benefits and we are doing our best to allow you to buy these quality solar products at fair prices. We’ve had a lot of positive feedback from our customers who have been impressed by the high quality of our products and excellent service. We are VAT registered in the UK and can provide VAT receipts upon request. Photonic Universe is a registered trademark in the UK.