Item Tag: Flexible

Sunpower Flexible C60 E60 Solar Cells 3.55W – Free Express Worldwide Shipping

Sunpower Cell & Busbar Master Selector Free worldwide shipping by Express Carrier (we choose FedEx, UPS, or DHL).Anywhere on the planet! These are «the best» solar cells, unbelievably better compared to the rigid cells. If you’ve worked with the regular mono or poly cells out of China, just think about how many you’ve broken! Or the headache of welding the backs of the cells in long strips. Another point that makes Sunpower so special – they (a) perform better in low light, and (b) pass current from other cells in the same series through a poorly lit cell with less resistance. This means you can avoid the use of diodes if you want (even altogether), and harvest more power in poor lighting conditions. One more point – the voltage generated per cell is twice that of traditional wafers, so you can build smaller usable panels. And did we mention that they are bendable up to 30°, very easy to solder and connect, especially by using the «dog bone» bars that you can add to the cell purchase right here on this listing, put out the best power even under poor light conditions – and we do our part to make sure you get them FAST and perfect with never a crack or a chip! Super light, super thin, approximately 0.6 volts output per cell. Flat rate shipping USA no extra charge any quantity. Affordable international rates. For international customers, we recommend EMS (Express Mail International), it is a little more expensive but fast and reliable worldwide delivery with full tracking. These are the best of available flexible solar cells currently on the market at an awesome price. Unlike the cheaper «brittle» mono and poly cells, these have the distinct line-free dark blue look. AND they bend up to 40º and are super light, which is just awesome. The future is here, today! Used on the solar impulse electric airplane due to the amazing light weight of each cell. These are rated at 3.6W, blemish-free «A Grade», no scrap, no B-Grade. Solid performers. This is the best solar cell bar none, and the best bang for your buck. No fingerprints, guaranteed no cracks, no stains, no blemishes. Best bang for the buck. We pay more and make less on every one sold than the competition. Recommended use with the 3-point dogbone bus bars to connect the cells to each other in series. These busbars are tinned copper 99% lead-free, made specifically for these cells. Buy as few or many as you need, there is no extra shipping charge for any quantity. Ships from USA (not china) so you get it fast without damage. These cells must be handled carefully. While they are much more flexible than traditional cells (30° bend), they are also easy to snap like a cracker if you are not careful and bend them past their maximum tolerance, especially if bending parallel to the collector lines. Each cell is incredibly thin and light, and should not be used without protective coating (EVA, silicone, etc) on both sides unless you’re using them in outer space. Features 3 tinned copper connection points per polarity. ROHS compliant. Extra care will be taken when shipping you the cells to ensure they arrive without damage.

Nanosolar Nanocell 2.6 Watt Lightweight Flexible CIGS Single Solar Cell – 0.45V

Nanosolar Nanocell 2.6 Watt Lightweight Flexible CIGS Single Solar Cell – 0.45V Nanosolar Nanocell 2.6 Watt Lightweight Flexible CIGS Single Solar Cell – 0.45V These are rated at about 0.45 volts at 5.8 amps and are a flexible cell made on a semi rigid but flexible aluminum base. We have found conductive glues or epoxy the best way to connect these cells. This is for a single individual solar cell which has a maximum electrical output (mppt) of 0.45 volts at 5.8 amps which calculates to 2.6 watts. This CIGS solar cells took over 70 steps to produce on multiple machines with hundreds of workers in a 200,000 sf factory in San Jose California. They are made on thin flexible aluminum sheets which make them difficult to weld or solder even with Alumiflux solder flux paste. We have had success using double sided conductive tape to connect. You can see the video of the output 10 cells connected with the tape have produced in partial sun conditions. We find these cells even produce energy when placed under a light bulb. Manufacturers Specifications   Raw Solar Cell Uncoated Rated Power: 2.6 Watts per cell Vmpp (V) 0.45 Impp (A) 5.8 Voc (V) 0.61 Isc (A) 6.7 Operating Module Temperature -40 to +85C Length: 165mm (6.5 inches) Width: 135mm (5.3 inches) Height: 0.4mm (0.02 inches) Weight: 18.5g per cell Raw Solar Cell Uncoated Lightweight Aluminum Structure CIGS Solar Cells which are Semi-Flexible This is a single cell. Packs of 10 or more are available in separate listings. Product manuals, data sheets, specifications, etc….are available in the DOWNLOADS tab above. Contact us if you have any questions.   These raw flexible solar cells are extremely rare and have never been offered for sale to the public before. These came from the last experimental production runs at the Nanosolar Facility in California. The facility and company was liquidated during September and October of 2013. We can ship these in packs of 10, bin racks of 1,000 cells, or cartons of 6,000 cells if you would like larger quantities. These raw solar cells are very robust for CIGS, however, will degrade if not encapsulated in weather tight enclosure. Its interesting for experiment we have left a few exposed and un-encapsulated for 2 years and have found minimal degradation. The CIGS solar cells are made of aluminum and to connect them we have used double sided conductive acrylic adhesive tape made by 3M / Tape Case (1182). Nanosolar used ultrasonic metal spot welders to connect the cells in production We have found a spot welder does connect them but if the settings are not just right you will blow a hole through them or the connection is weak. We believe a combination of the 3M 1182 tape and spot weld may be the best choice for DIY applications. We have had many questions regarding cutting these cells. When these cells are cut they retain their .45 volts but the amps are reduced somewhat proportionally. You cannot use regular scissors or tin snips as these are made of 2 thin sheets of aluminum separated by energy producing compounds. If the top (negative) and bottom (positive) aluminum sheets touch it shorts the cell. We have successfully cut these cells with a water-jet cutter as well as a sharp bench shear set at 45 degree angle. It is possible to cut and then sand the cut edges back until the two sheets are separated but that is a tedious task and not recommended. Also we have noticed the cut cells are not as robust as the uncut cells even when accounting for the size differences of the cells. The large area of metal (nickel coated aluminum) back is the positive output of the cell. The thin strip of un-coated aluminum on the down-facing side of the front is the negative output of the cell. Let us know if you have any questions about these cells. These came from the manufacturing floor of Nanosolar in San Jose and are being stored in air tight bags with desiccant. Each cell was tested for proper output by Nanosolar before being packaged and we have found these are very robust cells. These solar cells can be previewed at our facility in Ventura, California.   Condition: New This Aluminum Solar Cell is New and Unused. We have larger lots available if you’re interested. They have been stored in air-tight sealed cartons with desiccant to prolong shelf life. They are in excellent new condition. Please view our photo set and contact us if you have any questions.CLICK BELOW FOR MORE SOLAR OPTIONSShippingBest OffersReturns

Solopower SP3 Lightweight Thin Flexible CIGS Single Solar Cell @ 1W 0.45V 2A

Solopower SP3 Lightweight Thin Flexible CIGS Single Solar Cell @ 1W 0.45V 2ASolopower Lightweight Thin Flexible CIGS Single Solar Cell SP3 1.0W 0.45V This raw solar cell is un-coated. Will need to be encapsulated to withstand weather. We have tested these cells and found they can produce 0.45 Volts at about 2 Amps for approximately 1 Watt in perfect sun (no specs from manufacturer) Length: 127mm (5 inches) Width: 95.25mm (3.75 inches) Height: .253mm (.01 inches) Individual Cell Weight: 0.20 oz Lightweight Stainless Steel Structure CIGS Solar Cells which are Very-Flexible Solopower Lightweight Stainless Steel Super Flexible CIGS Solar Cell Demonstration – YouTube Video will open in a new window [isdntekvideo]   Condition: New Please view our photo set and contact us if you have any questions about the condition of this item.CLICK BELOW FOR MORE SOLAR OPTIONSShippingBest OffersReturns

One Pair (2) 60 Watt Portable Solar Panels From Ecoflow

The product is a set of two 60 watt portable solar panels by EcoFlow, featuring monocrystalline solar technology for efficient energy absorption. These black solar panels are flexible and foldable, making them perfect for outdoor use in various environments. With a maximum flow rate of 160W and a wattage range of 60-79W, these panels are easy to transport and set up, thanks to their portable design and MC4 connector type. Ideal for off-grid systems, these solar panels from EcoFlow are a reliable choice for clean and renewable energy supplies.

10 AWG XT60 Male Connector Adapter to Solar Extension Cable Battery Cable

Connector Type: XT60 Male to Solar. Wire Gauge: 10 AWG. Applications: Ideal for battery charging, solar power systems, automotive/RV power, e-bikes, and industrial applications. enables secure, high-current connections for LiPo batteries, solar panels, inverters, and power tools, ensuring efficient energy transfer.