Item Tag: Amorphous (Thin-Film)

Multi-Contact PV-ADBP MC3 Panel Mount Connectors – Lot of 10 Male/Female Pairs

Multi-Contact PV-ADBP MC3 Panel Mount Connectors – Lot of 10 Male/Female Pairs Multi-Contact MC3 Panel Mount Connectors PV-ADBP – Lot of 10 Male/Female Pairs   These are MC3 Connectors that are made to secure to a metal sheet that has been drilled out to receive this connector. As such the bare wires are inside the «box» and are not insulated. To be clear these are not typical MC3 connectors for connecting MC3 Connectors to exposed bare wires. They are made to be installed in a box or electrical panel allowing the MC3 male and female ends to be directly connected into the panel. Female: 32.0052 | 32.0302 | PV-ADBP 3/GWD | PV-A-ADBP3/GWD Male: 32.0053 | PV-ADBP3/GWD-UR   Condition: New These MC3 Connectors are new and is for a lot of 10 Pairs male and female connectors with panel mounting nuts. These are a specialty connector that allows fixed MC3 male and female connectors to extend out of an enclosed box.CLICK BELOW FOR MORE SOLAR OPTIONSShippingBest OffersReturns

Iris Technology SPACES II Portable Military Solar Energy Field Kit 78535-103399

The Iris Technology SPACES II Portable Military Solar Energy Field Kit 78535-103399 is a flexible solar panel kit designed for outdoor use. With a power source of solar energy and a wattage of 62W, this kit is portable, foldable, and features amorphous thin-film technology. The kit is specifically designed for military use, offering a reliable power solution in various field environments. Made in the United States, this solar energy field kit is a versatile and efficient option for alternative energy supplies. I can send you a picture of the actual content of the case, most are dropped ship from other sites, we check all the contents.

Uni-Solar PVL-128 128W 24V Flexible Solar Panel Grid-Tie Solder Points UL LISTED

Uni-Solar PVL-128 128W 24V Flexible Solar Panel Grid-Tie Solder Points UL LISTEDUni-Solar PVL-128 128W 24-Volt Flexible Amorphous Solar Panel with Bottom Facing SOLDER POINTS. These are top tier finished panels. Unisolar made them this way for a specific client. These are also Grid Tie UL 1703 Listed for Systems up to 600 VDC. Which means they were made to last 20 Years. See brochure.   Uni-Solar panels are lightweight, flexible and directly adhere to many roofing surfaces avoiding penetrations. They are also Category 3 (130 MPH) Hurricane uplift resistant and installed with no hardware. Each cell is connected to each other via bypass diodes. Therefore, if one cell is shaded or soiled, only the power output of this one shaded cell is lost – usually less than 4.5%.These panels are less than 1/5th the weight of crystalline solar panels and are designed for membrane and metal roofing system applications. Electrical Stats: Maximum Power (Pmax): 128 Watts Nominal Operating Voltage: 24 Volts Max Power Voltage (Vmpp): 33 Volts Max Power Current (Impp): 3.88 Amps Open Circuit Voltage (Voc): 47.6 Volts Short Circuit Current (Isc): 4.8 Amps Physical Stats: Panel Dimensions (Feet): 18 long x 1.29 wide Panel Dimensions (Inches): 216 long x 15.5 wide x 0.2 thick Panel Weight: 16 Pounds Electrical Connectors: None: Solder Points on bottom of panel Features: Lightweight & Flexible Easy Peel & Stick Application Virtually Unbreakable (No Glass) Shadow & High Heat Tolerant Frame Material: Frameless Bonding adhesive factory-installed on the back of the laminate Uni-Solar panels are lightweight, flexible and directly adhere to many roofing surfaces avoiding penetrations. Each cell is connected to each other via bypass diodes. Therefore, if one cell is shaded or soiled, only the power output of this one shaded cell is lost – usually less than 4.5%.These panels are less than 1/5th the weight of crystalline solar panels and are designed for membrane and metal roofing system applications. Here is a video with many examples.  UNISOLAR PVL-128 Solar Power Amorphous Flexible PV Panels – YouTube Video will open in a new window [isdntekvideo]     Condition: Open Box These brand new made in USA solar panels are packed and stored in the factory carton of 30 panels, but being sold as singles here. The Unisolar manufacturing and distribution facility was liquidated in 2012 and these panels came direct from Unisolar. We do have various brochures and installation guides produced by Unisolar available we can offer you if requested. Uni-solar peel and stick flexible panels are no longer made and are getting more rare by the day.CLICK BELOW FOR MORE SOLAR OPTIONSShippingBest OffersReturns