Item Tag: Amorphous (Thin-Film)

Uni-Solar PVL-136 136 Watt 24V Triple Junction Flexible Solar Panel w/ 4″ Wires

Uni-Solar PVL-136 136 Watt 24V Triple Junction Flexible Solar Panel w/ 4″ Wires Uni-Solar PVL-136 136W 24-Volt Flexible Amorphous Solar Panel with 22 Triple Junction Cells and Bottom Facing 4″ WIRES. These are top tier finished panels. Unisolar made them this way for a specific client. These are also Grid Tie UL 1703 Listed for Systems up to 600 VDC. Which means they were made to last 20 Years. See brochure Uni-Solar panels are lightweight, flexible and directly adhere to many roofing surfaces avoiding penetrations. They are also Category 3 (130 MPH) Hurricane uplift resistant and installed with no hardware. Each cell is connected to each other via bypass diodes. Therefore, if one cell is shaded or soiled, only the power output of this one shaded cell is lost – usually less than 4.5%.These panels are less than 1/5th the weight of crystalline solar panels and are designed for membrane and metal roofing system applications. The following are basic specs for individual solar panels Maximum Power (Pmax): 136 Watts Nominal Operating Voltage: 24 Volts Max Power Voltage (Vmpp): 33 Volts Max Power Current (Impp): 4.1 Amps Open Circuit Voltage (Voc): 46.2 Volts Short Circuit Current (Isc): 5.1 Amps Max System Voltage: 600 Volts Lightweight & Flexible Bypass Diodes at each cell connection Category 3 (130 MPH) Hurricane uplift resistant when installed in accordance with guidelines. Virtually Unbreakable (No Glass) Shadow & High Heat Tolerant Cells Per Module: 22 Frame Material: Frameless Connectors: None; 4″ Wires on bottom of panel Bonding adhesive factory-installed on the back of the laminate Panel Weight: 16 Pounds Panel Dimensions:216″ (18 Feet) x 15 3/8″ Uni-Solar panels are lightweight, flexible and directly adhere to many roofing surfaces avoiding penetrations. Each cell is connected to each other via bypass diodes. Therefore, if one cell is shaded or soiled, only the power output of this one shaded cell is lost – usually less than 4.5%.These panels are less than 1/5th the weight of crystalline solar panels and are designed for membrane and metal roofing system applications. Here is a video with many examples. UNISOLAR PVL-136 Solar Power Amorphous Flexible PV Panels – YouTube Video will open in a new window [isdntekvideo]   Condition: New These brand new made in USA solar panels are packed and stored in the factory carton of 30 panels, but sold as singles here. The Unisolar manufacturing and distribution facility was liquidated in 2012 and these panels came direct from Unisolar. We do have various brochures and installation guides produced by Unisolar available we can offer if requested. Unisolar peel and stick flexible panels are no longer made and are getting more rare by the day.CLICK BELOW FOR MORE SOLAR OPTIONSShippingBest OffersReturns

Uni-Solar PVL-128 Carton 30 UL LISTED 128W 24V Solar Panels – 3840W – 4″ Wires

Uni-Solar PVL-128 Carton 30 UL LISTED 128W 24V Solar Panels – 3840W – 4″ WiresUni-Solar PVL-128B 3840 Watt Carton of 30 128 Watt Solar Panels with Bottom Facing 4″ Wires. We include free MC3 Cables and Junction box for DIY installations. Uni-Solar panels are lightweight, flexible and directly adhere to many roofing surfaces avoiding penetrations. They are also Category 3 (130 MPH) Hurricane uplift resistant and installed with no hardware. Each cell is connected to each other via bypass diodes. Therefore, if one cell is shaded or soiled, only the power output of this one shaded cell is lost – usually less than 4.5%.These panels are less than 1/5th the weight of crystalline solar panels and are designed for membrane and metal roofing system applications. Electrical Stats: Maximum Power (Pmax): 128 Watts Nominal Operating Voltage: 24 Volts Max Power Voltage (Vmpp): 33 Volts Max Power Current (Impp): 3.88 Amps Open Circuit Voltage (Voc): 47.6 Volts Short Circuit Current (Isc): 4.8 Amps Physical Stats: Panel Dimensions (Feet): 18 long x 1.29 wide Panel Dimensions (Inches): 216 long x 15.5 wide x 0.2 thick Panel Weight: 16 Pounds Electrical Connectors: None: Bare, 4-inch wires on bottom of panel (RED and BLACK for positive and negative). We include free MC3 Cables and Junction box for DIY installations. Features: Lightweight & Flexible Easy Peel & Stick Application Virtually Unbreakable (No Glass) Shadow & High Heat Tolerant Frame Material: Frameless Bonding adhesive factory-installed on the back of the laminate Uni-Solar panels are lightweight, flexible and directly adhere to many roofing surfaces avoiding penetrations. Each cell is connected to each other via bypass diodes. Therefore, if one cell is shaded or soiled, only the power output of this one shaded cell is lost – usually less than 4.5%.These panels are less than 1/5th the weight of crystalline solar panels and are designed for membrane and metal roofing system applications. Here is a video with many examples.  UNISOLAR PVL-128 Solar Power Amorphous Flexible PV Panels – YouTube Video will open in a new window [isdntekvideo]   Condition: New Brand New Carton of 30 solar panels. FREE MC3 Cables and Junction box for DIY installations included for every panel. These panels have bottom-facing 4-inch wires for connections below the panel. Shipping shown is for freight shipping to your nearest terminal for you to pickup. Please view our photo set and contact us if you have any questions.CLICK BELOW FOR MORE SOLAR OPTIONSShippingBest OffersReturns

1.5W Solar Battery Charger Cigarette Lighter Plug

It’s designed for efficiency, ease of use, and maximum durability, allowing you to keep all your 12-volt batteries topped up -round. Don’t let battery drain dampen your adventures; invest in a solar solution that works, rain or shine.

iLand XZS8-16 16-Watt 12-Volt Solar Panel – Flexible Rollable Portable Amorphous

iLand XZS8-16 16-Watt 12-Volt Solar Panel – Flexible Rollable Portable Amorphous iLand XZS8-16 16-Watt 12-Volt Solar Panel – Flexible Rollable Portable Amorphous – Solder Points (No Cables / Connectors Attached) Approximate Specs: Voc: 16 Volt DC (Open Circuit Voltage) Vmp: 12 Volt DC (Load Power Voltage) Isc: 1.5 Amp (Short Circuit Current) Physical Stats Overall dimensions: 15″ wide x 37″ Long (inches) – 1.8 LBS Rolled-up diameter: 8 inches (approximate) This panel consists of 8 solar cells Connectors: Solder Point The color of the solar cells and/or borders may vary from the panel show in the photographs.   Condition: Used This is a new old stock panel from storage at Xunlight’s warehouse in the USA. It has covered solder points for the electrical connection. The top-sheet will need to be uncovered carefully with small tools to uncover the solder points (the two «yellow squares» near the manufacturer’s logo). Please view our photo set and contact us with any questions.CLICK BELOW FOR MORE SOLAR OPTIONSShippingBest OffersReturns

Xunlight XRS10-83 83W 16V Solar Panel Battery Charging – No Cables – Metal Tabs

Xunlight XRS10-83 83W 16V Solar Panel Battery Charging – No Cables – Metal Tabs Xunlight XRS10-83 83W 16V Solar Panel for Battery Charging – Flexible Amorphous – 9-ft 8-in Long. No sticky backing allows the panel to be lighter and more portable. Panels have positive and negative solder-able contact tabs to add your own cables and connectors (MC4 cables are included). These strong flexible, rollable solar panels were made in Ohio USA at the Xunlight factory before they closed in 2016. ETFE top sheet (no glass) designed to withstand harsh outdoor use for 20-year lifespan. Electrial Stats: Peak Stats at 100% Factory-Perfect Simulated Sun Power Pm: 83 Watts Voltage at Max Power Vm: 16.67 Volt Current at Max Power Im: 5.00 Amp Open Circuit Voltage Voc: 22.5 Volt Short Circuit Current Isc: 6.35 Amp Physical Stats Overall dimensions: 9.8 Feet Long x 1.6 Feet Wide (118 Inches Long x 19 Inches Wide) Overall lengths and widths may vary +/- 2 inches as they do not have their final trim. Rolled-up diameter: 12 inches (approximate) This panel consists of 10 solar cells Connectors: Copper Tabs for soldering or quick disconnects The color of the solar cells and/or borders may vary from the panel shown in the photographs. These panels are untrimmed, so the physical dimensions and weights are APPROXIMATE since the amount trimmed may vary from panel to panel. We include a free set of MC4 cables with J-Box for DIY installation.   Condition: Used These panels have cosmetic issues and are factory seconds, causing their overall lengths and widths to vary +/- 3 inches as they do not have their final trim. They are in good condition and are perfect for use as portable battery chargers for RV, Trailers, Boats and Vans.CLICK BELOW FOR MORE SOLAR OPTIONSShippingBest OffersReturns

BATTERY TENDER 022-0165-DL-WH Battery Charger,12VDC,1.25A 10W828

Battery Charger, Charger Style Mounted, For Use With Battery Type AGM, Lead Acid, Wet Cell, Automatic/Manual Automatic, For Battery Voltage 12 V DC, Charging Current @ Voltage 1.25 A @ 12V, Maintaining Current @ Voltage 1.25 A @ 12V, Cable Length 54 in, Cable Wire Gauge 18 AWG, Charge Type Smart, Charger Function Charging, Maintaining, Connector Type Alligator Clip, Quick Disconnect to Ring, Housing Material Plastic, Includes Alligator Clips, Quick Disconnect Rings, Includes Test Feature Yes.