Item Tag: 10 A or Less

100W Portable Power Station Solar Generator & 40W Solar Panel for Camping Trip

Product Description POWER UP TO 7 DEVICES WITH Portable solar generator power station 200W Peak/100W Rated with solar panels 40W included, JUST GRAB AND GO Specifications for 100W Portable Power StationSolar Generator with AC DC outlet for Home Use Camping Outdoor Emergency Color: Black+Red Dimension:‎7.3*6.3*3.7in / 19.2*15.6*9.4cm Weight:3.3lbs/1.5kg Watts: 200W Peak/100W Rated Capacity: 146Wh/39600mAh Recharhing methods: 3 ways a. Charging this solar powered generator camping by solar panels — Recommend 40W~100W Solar panels（Required input voltage range:DC13V~23V/2A Max） b. Charging this portable power station generators for home use with solar panel by Home Wall outlet: Wall AC adapter (Included)： — Input: 100~240V,50/60Hz 0.8A MAX — Output:15V/2A 30W MAX c. Charging this portable generator power station for camping battery pack by Car Charging Cable — 12V Car Charging Cable((Included) Total 7 Output ports * AC Output：110V/60Hz/100watt/Modified sine wave(Please note: modified sine wave is not suitable for medical equipment, noise may be generated during use,this is a normal phenomenon) * DC Output(φ5.5mm, 2.1mm)：9V~12.6V/10A (MAX) (DC output voltage drops as battery capacity decreases) * USB Output：USB1+USB2:5V/3.1A MAX * USB Output：USB3&USB-C:5V/3A 9V/2A MAX What’s in the box 1 * 100W solar generator power station with a 40W solar panel 1 * Wall AC power adapter for portable power station(15V/2A MAX) 1 * 12V Cigarette Lighter Adapter for R100 Portable Solar Powered Generator 1 * Car Charging Cable 1 * user manual for 100W Solar Generator 1 * user manual for the 40W solor panel Warm Reminder For You: – The portable solar generator for home use camping Can’t support devices power over 100W, it may damage the portable solar power station, especially some devices that are prone to heat or built-in air compressor such as coffee maker,Hair dryer, water pump etc – It is recommended to recharge power station mini-generator for camping at least once every 3 months. if not use, keep the battery capacity of mini-generator at 60%-80%) ATTENTION: 1. The power station has built-in lithium-ion battery pack, keep it away from fire. 2. It’s not waterproof, do not expose to liquids. Make sure the product is protected from moisture and keep it away from water or humid conditions. 3. Do not drop, puncture, or damage this product as it may cause the battery to become unstable. 4. To preserve the battery lifespan, need to use and recharge at least once every 3 months. And It is appropriate to keep the battery power at 40%-60%. 5. Use original or certified charger and cables. 6. Avoid extreme temperature. 7. Do not disassemble. 8. Please dispose of batteries and electronic goods in accordance with local regulations. ———————————————————————————————————————– Payment Policy 1. We accept ebay managed payments via PayPal, Payoneer, Visa, Mastercard, Apple Pay, Google Pay etc. 2. Sale taxes and charges at local Buyer’s country/city are not included in eBay item prices or shipping cost. These charges shall be the buyer’s responsibility. 3. Kindly check the details of payments to determine what costs will be prior to bidding or buying. Shipping Policy 1. Item usually ship out within 3 working days after clear payment received. 2. We will not ship to Puerto Rico Or PO Box. Returns Policy 1. If package damaged via transporting, please email us for better solution when you received it. 2. If the item has quality or working problems, please contract us within 30 days of the receipt of your order. 3. We accept return or exchange, Please keep all the original package — return should be in good condition and with complete accessories. Contact Us Any questions or need any help, please contact us via ebay message first before you do anything else, we would be glad to help. Good communication is always good way to good solutions. Wish you all best and just purchase our Power Stations with confidence !!

12V 24V Solar Panel Tracking LCD Dual Axis Solar Tracker Controller + Anemometer

12V 24V Solar Panel Tracking LCD Dual Axis Solar Tracker Controller + Anemometer 12V 24V Solar Panel Tracking LCD Dual Axis Solar Tracker Controller + Anemometer Package Included: * 1PCS Electronic LCD Controller Box. * 1PCS Light Sensor with 3 Meters Wire. * 1PCS IR Remote Control (No Battery Included). * 1PCS Wind Speed Sensor (Anemometer) with 3 Meters Wire. * 1PCS English User’s Manual. Dual Axis Solar Tracker Controller: Here for sale is WST03-2 Dual Axis Solar Tracker Controller, The whole unit contains the Controller Box, Light Sensor With 3 Meters Wire and IR (infrared) Remote control. The controller analyzes the signal from the light sensor, then control the motor of the corresponding direction to execute positive rotation, reverse rotation and stop, and make the platform to be aligned with the sun.Three Modes will appear during the controller’s auto working, the controller will automatically switch the three modes according to different conditions. The three Modes are: Sunny Day Auto Tracking Mode, Night (Cloudy Day) Mode, Strong Wind Protection Mode.Users can set the parameters and working modes by the LCD screen for actual needs. There is an IR Remote for manual control, it can be used for testing when you assemble/use the controller the first time. Extra Limit Switch and Wind Speed Sensor (Anemometer) can be matched with the controller for actual needs. We provide more instruction and detailed settings in the English User’s Manual. Specification:Product NameWST03-2 Solar Tracker ControllerBrandSZMWKJCondition100% NewController Box Dimension145x90x40mm (5.71″x3.54″x1.57″)Input VoltageDC 12V/24V (DC 9V~35V)Max Load Current15AOperating Temperature-20℃ to +60℃Tracking Accuracy≤1° Controller Box: Controller Features:1. High tracking accuracy, average tracking accuracy ≤ 1° (Actual accuracy is related to the platform’s moving speed);2. The light sensor has a wide range of detection angle and high accuracy. It’s inside the waterproof case, waterproof, dustproof and anti-aging;3. With LCD display which can show multiple working modes and parameters;4. Many of the parameters can be set (Tracking accuracy, threshold value of light-sensor, threshold value of wind speed sensor, interval time of cyclical tracking, etc…);5. With strong wind protection mode (Wind speed sensor is required);6. Can set the platform to stay at any position at night (or cloudy day);7. Can add extra limit switches;8. Can be operated by IR remote control or the buttons on the controller box;9. Reverse battery protection, overcurrent protection; standby current ≤15mA. Controller Attention Matters:1.Input Power Supply: DC 12V/24V (DC 9V~35V) Output Voltage=Input Voltage Output Current: E/W≤7.5A, S/N≤7.5A, total current ≤15A2.The controller needs stable power supply, it can be battery or switching power supply, solar panels cannot be directly connected as power supply, unstable voltage may damage the controller. The maximum current of the power supply must be greater than 1.5 times of the total load current of the platform, because the starting current for DC motor is relatively large.3.This controller can directly drive DC brush motor, the rated voltage of the motor should be the same as the power voltage of the controller. If use other types motor, this controller cannot directly drive, in this case additional control circuit is needed.4.If the motor current in a single direction is greater than 7.5A, a relay module is needed to increase the load capacity of the controller.5.The controller is preferably fixedly installed and will not move together with the platform. The controller box is not waterproof and should prevent water from entering. Light Sensor and IR Remote: Light Sensor Attention Matters:1. The light sensor should be fixed on the platform and can move together with the platform, it cannot be blocked by anything.2. The base of the light sensor must be parallel to the solar panel or on the same plane.3. The “East” direction marked on the light sensor must be consistent with the local geographic direction.4. The length of the connecting wire for the light sensor must be greater than the platform’s movable range. (Factory default length is 3 meters, it can be increased to 30 meters at most) IR Remote Attention Matters:1. The remote control requires 2 pieces AAA batteries (factory defaults no batteries inside).2. The remote control belongs to infrared remote control, it must be aligned with the controller when using, the remote control range is ≤ 6 meters.3. The buttons on the remote control have the same function as the buttons on the controller box. Wind Speed Sensor (Anemometer): This wind speed sensor is composed of a shell, three wind cups and a circuit module. The whole sensor has a high strength, weather resistance, corrosion resistance and water resistance, will be to ensure the long-term use of the instrument, and the accuracy of the wind speed collection. It is very suitable for outside measurement. Specifications: Brand: SZMWKJModel: MW-FS03Material: Polycarbonate MaterialColor: BlackAccuracy: ± 1m/sStart-up Wind Speed: 0.2-0.4 m/sOutput Type: Voltage OutputMeasurement Range: 0-32.4m/sOutput Signal: 0-5VWind Speed: (Output voltage/5)*32.4m/sCable Length: 3 Meters The solar tracker controller can work normally without the wind speed sensor, but if you want to use the Strong Wind Protection function, you need to use wind speed sensor, the output signal of the wind speed sensor should be voltage type, the signal output range should be 0-5V, the power voltage of the wind speed sensor should be the same as the power voltage of the controller. Wiring of the Wind Speed Sensor: Application: Solar tracking system: Solar photovoltaic System, solar thermal system, light guide and lighting, etc. Want more information? Additional information and detailed instructions can be found in the User’s Manual About Shipping: * This item will be shipped out within 1-3 Business Days after confirmed payment received. * Goods in stock in USA, buyer can get the parcel around 3-5 business days. * We provide tracking number freely for all buyers. * Please confirm your shipping address is correct. Buyers are responsible for undeliverable order due address mismatch. We reserve the right to charge shipping fee to reship undeliverable items. * Any potential customs tax fee applied to the parcel should be covered by the buyer.

FlashFish 200W Portable Power Station Generator Li-ion with 60W 18V Solar Panel

E200 Specifications:‌ Model:E200 Dimensions:8.2×4.3×6.2in(208x110x158mm) Weight:5.6lb (2.55kg) Capacity:151Wh/40800mAh Battery Type:Li-ion Cycle life:800+ AC Output:110V/200W Rated, 250W Peak Power DC Output:9~12V/ 10A (Max) USB-A Output(x1):5V/ 2.4A USB-A QC3.0 Output(x2):18W DC Input:15V/2.5A Operating Temperature:14-104F (-10-40℃) What’s Included:‌ 1× Flashfish E200 Power Station 1× Car charger 1× Power adapter 1× Cigarette lighter adapter 1× User Manual.

FLASH FISH, POTRABLE POWER STATION,M# E200, AC/DCX2,BOX ONLY NO SOLAR PANEL (A6

The FLASH FISH E200 Portable Power Station is a versatile solution for off-grid power needs. With its AC/DC capabilities and 200W pure sine wave output, it can provide electricity for a variety of applications such as recreational vehicles, marine use, sheds, camping/hiking trips, electronics, and as a backup power source for automotive needs. The solar technology utilized by FLASH FISH allows for maintenance-free operation, and the built-in USB port ensures easy connectivity for charging devices on the go. Its compact and portable design makes it ideal for on-the-fly use without the need for a solar panel.

Flashfish E200 200W Portable Power Station 151Wh Solar Generator for Outdoor/RV

About This Portable Power Station The Flashfish E200 200W Portable Power Station is a compact off-grid solar generator ideal for outdoor activities like camping and RV trips. It features a monocrystalline solar panel, 151Wh capacity, and 200W AC output. The portable unit is easy to carry, maintenance-free, and equipped with various protection properties like overload and short circuit protection. It includes a USB port for charging electronic devices and is designed for durability in outdoor environments. Product Specification Model: E200 Capacity: 151Wh (40800mAh) Power: 200W (Peak 250W) AC Output: 110V 60Hz Wave Form: Pure Sine Wave USB Output: 2xQC3.0 (18W); 1x5V/2.4A DC Output: 2×9-12.6V/10A (Max) What You Get 1* Portable Power Station 1* Power Adapter 1* Car Charger 1* Cigarette Lighter Adapter 1* USB Light 1* User Manual Welcome to Flashfish Offical Store! Flashfish provides our dear customers with warranty of 12 months from the date of purchase and friendly customer service. We attach great importance to customer satisfaction, and will try our best to provide the best service to a valuable buyer like you. If you have any questions about our products or services, please contact us through eBay message in advance. Wish you a pleasant shopping experience!